Imaging
Extracting coordinates and color information for further processing
Docs for v2.1.19, the latest version.
2
What the node takes in, from wires or typed values.
Image
Accepts input image data for analysis
Points
UV points (x,y) in domain space
4
What the node gives out, to wire into other nodes.
Color
Color values in hexadecimal format (#RRGGBBAA)
Hue
Hue (0..1; multiply by 360 for degrees)
Saturation
Saturation (0..1)
Brightness
Brightness / Value (0..1)
5
Settings on the node itself, changed in its panel.
T
C
X
Domain [x0, x1]
Y
Domain [y0, y1]
I
Bilinear interpolation
Extract color data from specific UV points on an image, with domain mapping, tiling, channel selection, and optional bilinear interpolation.
Using Search List
image, sampler, uv, color, analysis.Select from Menu
Image (image) — Type: Image
Accepts the source image to sample.
Points (points) — Type: Point[]
An array of UV points (x, y) in domain space (see Config below). Each point corresponds to one sampled output.
Tiling (T / tiling) — clamp | tile | flip (default: clamp)
How samples behave outside the image bounds after domain mapping:
clamp: pins to the nearest edgetile: repeats the imageflip: mirrors every other tileChannel (C / channel) — rgba | red | green | blue | alpha (default: rgba)
Which channel(s) to read before converting to outputs.
X Domain (X / xDomain) — [x0, x1] (default: [0, 1])
Maps the U coordinate of your points from this domain into the image width.
Y Domain (Y / yDomain) — [y0, y1] (default: [0, 1])
Maps the V coordinate of your points from this domain into the image height.
Interpolate (I / interpolate) — Boolean (default: false)
Enables bilinear interpolation for smoother sampling between pixels.
Tip: With the default domains
[0,1] × [0,1], UV(0,0)samples the image’s bottom-left and(1,1)the top-right (depending on your image origin; flip Y domain to match your convention).
Color (colorHex) — Type: Color
Hex color #RRGGBBAA at each input point (alpha included).
Hue (hue) — Type: Number
Hue in 0..1. Multiply by 360 for degrees.
Saturation (saturation) — Type: Number
Saturation in 0..1.
Brightness (brightness) — Type: Number
Brightness/Value in 0..1.
Color, Hue, Saturation, and Brightness arrays—each aligned with the input points order.t in [0,1] → (t, 0.5)), enable * *Interpolate** for smooth gradients, and read Hue to drive geometry colors.[0,1]², set Channel to alpha to use image transparency as a density mask.x ∈ [0, W], y ∈ [0, H]), set X Domain to [0, W] and Y Domain to [0, H] for direct mapping.tile for seamless textures; use clamp to avoid wrap artifacts on borders; use flip to reduce seams when mirroring.Channel selection is applied before conversion to HS(B)V and hex.colorHex includes AA; use Channel = alpha if you only need the alpha mask numerically.[1, 0] (flip) to align with bottom-left UV conventions.First documented in v2.1.16
Oct 20, 2026
Versions before it were published before changes were recorded.