Represents a T-beam profile with configurable material, dimensions, texture, price, and weight.

T-Beam

material

Materials nodes for the BeeGraphy Editor.

Sheet

Factory

Linear

Volumetric

Deconstruct Material

Texture

Count

Weight

Profile

Materials.png

Materials Light.png

Material

side

Returns geometry with configured material

geometry

Material Assign

resultGeometry

Represents a linear tape with configurable material, width, thickness, face and edge textures, price, and weight.

Linear Flat

Represents a solid, hexagonal-profile bar with configurable material, dimensions, texture, price, and weight.

Hex Bar

The amount of material lost to cutting. Used for manufacturing precision.

kerf

Generates a rectangular solid bar (box-shaped) using the specified dimensions and material.

Material with defined width and height used to construct the solid rectangular bar.

Extrusion length of the rectangular bar along the Y-axis.

length

3D origin point of the rectangular bar in space.

origin

Rectangle Bar Factory

Final solid geometry of the rectangular bar.

profile

Width of the material removed by the cutting tool during processing (e.g., laser, saw).

Generates a solid cylindrical bar (round bar) from the specified material, with configurable diameter, length, and origin point

Length of the round bar. Must be a positive number.

3D origin point where the round bar will be generated.

Round Bar Factory

Solid cylindrical geometry representing the generated round bar.

Kerf is the width of material removed by a cutting tool, such as a saw blade, during a cut.

Generates an L-beam solid with unequal legs based on the selected material.

Material must include the "l-beam-unequal" class with dimensions for both legs and thickness.

Extrusion length of the L-beam along the Y-axis.

Starting point of the L-beam in 3D space.

L-Beam Different Factory

Resulting 3D solid of the unequal-leg L-beam.

Breaks down a linear round material (e.g., tape, strip) into its fundamental attributes for detailed access and usage.

Deconstruct Linear Round

The total length of the linear flat, typically measured in millimeters or inches.

The thickness of the linear flat material, indicating how thin or thick it is.

diameter

The overall mass of the linear round material, typically expressed in kilograms or pounds, indicating how heavy it is.

weight

The monetary cost associated with the linear round material, given in the relevant currency.

price

Breaks down a material to extract its weight and other fundamental attributes for detailed access and usage.

Deconstruct Weight

The overall density of the weight material, typically expressed in kilograms or pounds, indicating how heavy it is.

density

The monetary cost associated with the weight material, given in the relevant currency.

The Deconstruct L-Beam Different node extracts structural and material properties from an asymmetrical L-beam profile, enabling in-depth analysis and manipulation.

Deconstruct L-Beam Different

The total length of the L-beam, typically measured in millimeters or inches.

The shorter side length of the asymmetrical L-beam profile.

shortLeg

The longer side length of the asymmetrical L-beam profile.

longLeg

thickness

The overall mass of the asymmetrical L-beam material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the asymmetrical L-beam material, given in the relevant currency.

The Deconstruct Square Tube node is used to break down a square tube material into its fundamental attributes, allowing for detailed analysis and manipulation.

Deconstruct Square Tube

The length of the square tube, typically in meters or inches.

The external width of the square tube, typically in meters or inches.

width

The wall thickness of the square tube, typically in meters or inches.

The overall mass of the square tube material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the square tube material, given in the relevant currency.

The Deconstruct T-Beam node is used to break down a T-beam material into its fundamental attributes, allowing for detailed analysis and manipulation.

Deconstruct T-Beam

The length of the T-beam, typically in meters or inches.

The vertical depth dimension of the T-beam, in units like meters or inches.

depth

The width of the flange part of the T-beam.

flangeWidth

flangeThickness

The thickness of the web (vertical section) of the T-beam.

webThickness

The overall mass of the T-beam material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the T-beam material, given in the relevant currency.

color

The name of the texture available in the BGPM texture library

texture

metalness

roughness

opacity

Apply Material

Represents materials sold individually or in kits, such as components, assemblies, and products.

Represents a material that is priced and sold based on weight.

Represents a C-shaped beam with configurable material, dimensions, texture, price, and weight.

C-Beam

Represents an L-beam (corner profile, angle profile) with different side lengths, configurable material, dimensions, texture, price, and weight.

L-Beam Different

Generates a flat solid sheet from material and size parameters.

Material defining the thickness and other sheet parameters.

Width of the sheet along the X-axis, in millimeters.

Length of the sheet along the Y-axis, in millimeters.

Sheet Factory

Generated 3D solid of the sheet geometry.

sheet

Width of material removed by tool. Used for process registration and downstream manufacturing steps.

Applies a volumetric material to an input solid and registers processing options (volume, kerf).

Volumetric material (materialClass: "volumetric").

Base 3D solid to which the volumetric material will be applied.

solid

Volumetric Factory

Resulting 3D solid with the volumetric material applied.

volumetric

Counts instances from points, aligns optional orientation vectors, and returns a material-applied carrier geometry with placement metadata.

points

Orientation vectors. Either a single vector applied to all points, or a DataTree parallel to points. Defaults to Z+.

directions

Count Factory

Carrier solid with applied material and meta.

geometries

The width of material lost due to cutting during fabrication (default is 3mm).

Creates a hollow cylindrical solid (round tube) using the given material, diameter, wall thickness, and length

Extrusion length of the tube along its axis. Must be a positive number

3D starting point for the tube base center

Round Tube Factory

The resulting hollow cylindrical geometry as a 3D solid

Generates a solid hexagonal bar using material dimensions and extrudes it along the Y-axis.

Material containing widthAcrossCorners and widthAcrossFlats for hex bar geometry.

Extrusion length of the hex bar along the Y-axis.

3D starting point of the hex bar geometry.

Hex Bar Factory

The resulting 3D solid geometry of the hexagonal bar.

Width of material removed during cutting; may affect real-world manufacturing precision

Generates a 3D solid T-beam profile based on structural parameters such as flange width, depth, and web thickness

Total length of the beam extrusion along the X-axis

3D origin point where the beam starts; sets the base position of the T-beam

T-Beam Factory

The resulting 3D solid geometry of the extruded T-beam

Breaks down a linear flat material (e.g., tape, strip) into its fundamental attributes for detailed access and usage.

Deconstruct Linear Flat

The width of the linear flat material, typically in millimeters or inches.

The overall mass of the linear flat material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the linear flat material, given in the relevant currency.

The Deconstruct C-Beam node extracts the structural and material properties of a C-beam profile, allowing for precise analysis and manipulation.

Deconstruct C-Beam

The full length of the C-beam, typically in millimeters or inches.

The total height of the C-beam cross-section.

The width of the flange portion of the C-beam profile.

The thickness of the vertical web between the flanges.

The mass of the C-beam, typically in kilograms or pounds.

The monetary cost associated with the C-beam material, given in the relevant currency.

The Deconstruct I-Beam node extracts essential structural and material attributes from an I-beam profile, enabling precise modeling, simulation, and cost analysis.

Deconstruct I-Beam

The overall length of the I-beam, typically measured in millimeters or inches.

The vertical height of the I-beam cross-section from flange to flange.

The width of each flange (horizontal part) of the I-beam profile.

The thickness of the top and bottom flanges of the I-beam.

The thickness of the vertical central section (web) connecting the flanges.

The overall mass of the I-beam material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the I-beam material, given in the relevant currency.

The Deconstruct Rectangle Tube node breaks down a rectangular tube material into its core attributes for detailed analysis and customization.

Deconstruct Rectangle Tube

The total length of the rectangular tube, usually measured in millimeters or inches.

The outer width of the rectangular cross-section of the tube.

The outer height of the rectangular cross-section of the tube.

height

The wall thickness of the tube, typically consistent on all sides.

The overall mass of the rectangular tube material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the rectangular tube material, given in the relevant currency.

The Deconstruct Round Bar node breaks down a round bar material into its essential attributes, enabling detailed analysis and customization.

Deconstruct Round Bar

The total length of the round bar, usually measured in millimeters or inches.

The overall mass of the round bar material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the round bar material, given in the relevant currency.

Represents a linear round material with configurable kind, diameter/thickness, texture, price, and weight.

Linear Round

Represents a flat sheet material with configurable material type, dimensions, textures, price, and weight.

Represents a hollow rectangular-profile tube with configurable material, dimensions, texture, price, and weight.

Rectangle Tube

Represents a solid, round-profile bar with configurable material, dimensions, texture, price, and weight.

Round Bar

Represents a hollow, square-profile pipe with configurable material, dimensions, texture, price, and weight.

Square Tube

Represents a solid, square-profile pipe with configurable material, dimensions, texture, price, and weight.

Square Bar

Generates a 3D solid of linear flat material (such as a strip or tape).

Material defining the width, thickness, and other physical properties of the strip.

Extrusion length of the linear flat along the Y-axis, in millimeters.

Starting 3D point of the linear flat in space.

Linear Flat Factory

Generated 3D solid geometry of the linear flat material.