Represents an area-coverage material (e.g. paint or coating) with configurable coverage, layering, density, and price per unit of area.

Area

material

Materials nodes for the BeeGraphy Editor.

Linear

Sheet

Volumetric

Deconstruct Material

Texture

Weight

Factory

Count

Profile

Materials.png

Materials Light.png

Material

Returns geometry with configured material

geometry

color

The name of the texture available in the BGPM texture library

texture

metalness

roughness

opacity

Apply Material

resultGeometry

Represents materials sold individually or in kits, such as components, assemblies, and products.

Represents a volumetric material with type, density, and price per unit of volume.

Represents a C-shaped beam with configurable material, dimensions, texture, price, and weight.

C-Beam

Represents a solid, hexagonal-profile bar with configurable material, dimensions, texture, price, and weight.

Hex Bar

Represents a hollow round pipe profile with configurable material, dimensions, texture, price, and weight.

Round Tube

Represents a hollow, square-profile pipe with configurable material, dimensions, texture, price, and weight.

Square Tube

Represents a solid, square-profile pipe with configurable material, dimensions, texture, price, and weight.

Square Bar

Kerf is the width of material removed by a cutting tool, such as a saw blade, during a cut.

kerf

Generates a 3D solid of linear flat material (such as a strip or tape).

Material defining the width, thickness, and other physical properties of the strip.

Extrusion length of the linear flat along the Y-axis, in millimeters.

length

Starting 3D point of the linear flat in space.

origin

Linear Flat Factory

Generated 3D solid geometry of the linear flat material.

linearFlat

Counts instances from points, aligns optional orientation vectors, and returns a material-applied carrier geometry with placement metadata.

points

Orientation vectors. Either a single vector applied to all points, or a DataTree parallel to points. Defaults to Z+.

directions

Count Factory

Carrier solid with applied material and meta.

geometries

Width of material removed during cutting (e.g., laser or saw). Affects processing precision

Generates a rectangular solid bar (box-shaped) using the specified dimensions and material.

Length of the bar extrusion. Must be a positive number and within material limits.

3D origin point where the bar starts. Defines the base position of the extrusion

Square Bar Factory

Resulting solid geometry of the square bar after extrusion and material assignment

profile

Generates a 3D I-beam (H-beam) solid using selected material dimensions and extrusion length.

Material must include the "i-beam" class with dimensions for flanges, web, and thickness.

Extrusion length of the I-beam along the Y-axis.

Starting point of the I-beam in 3D space.

I-Beam Factory

Resulting 3D solid geometry of the I-beam.

Generates a hollow hexagonal tube using material parameters and extrudes it along the Y-axis.

Material containing widthFlats, widthCorners, and thickness properties for hex tube geometry.

Extrusion length of the hex tube along the Y-axis.

3D starting point of the hex tube geometry.

Hex Tube Factory

The resulting 3D solid geometry of the hollow hexagonal tube.

Breaks down a linear round material (e.g., tape, strip) into its fundamental attributes for detailed access and usage.

Deconstruct Linear Round

The total length of the linear flat, typically measured in millimeters or inches.

The thickness of the linear flat material, indicating how thin or thick it is.

diameter

The overall mass of the linear round material, typically expressed in kilograms or pounds, indicating how heavy it is.

weight

The monetary cost associated with the linear round material, given in the relevant currency.

price

The Deconstruct Round Bar node breaks down a round bar material into its essential attributes, enabling detailed analysis and customization.

Deconstruct Round Bar

The total length of the round bar, usually measured in millimeters or inches.

The overall mass of the round bar material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the round bar material, given in the relevant currency.

The Deconstruct Square Tube node is used to break down a square tube material into its fundamental attributes, allowing for detailed analysis and manipulation.

Deconstruct Square Tube

The length of the square tube, typically in meters or inches.

The external width of the square tube, typically in meters or inches.

width

The wall thickness of the square tube, typically in meters or inches.

thickness

The overall mass of the square tube material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the square tube material, given in the relevant currency.

The Deconstruct T-Beam node is used to break down a T-beam material into its fundamental attributes, allowing for detailed analysis and manipulation.

Deconstruct T-Beam

The length of the T-beam, typically in meters or inches.

The vertical depth dimension of the T-beam, in units like meters or inches.

depth

The width of the flange part of the T-beam.

flangeWidth

flangeThickness

The thickness of the web (vertical section) of the T-beam.

webThickness

The overall mass of the T-beam material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the T-beam material, given in the relevant currency.

Represents a linear round material with configurable kind, diameter/thickness, texture, price, and weight.

Linear Round

Represents an I-beam profile with configurable material, dimensions, texture, price, and weight.

I-Beam

Represents a hollow rectangular-profile tube with configurable material, dimensions, texture, price, and weight.

Rectangle Tube

Represents a solid rectangle bar profile with configurable material, dimensions, texture, price, and weight.

Rectangle Bar

Represents a solid, round-profile bar with configurable material, dimensions, texture, price, and weight.

Round Bar

Generates a 3D solid of linear round material (such as a strip or tape).

Linear Round Factory

linearRound

Registers an area material against a covered area so it can be priced and tracked.

area

Area Factory

Pass through of the input material. The covered area is registered in the processing registry during exec.

The amount of material lost to cutting. Used for manufacturing precision.

Material with defined width and height used to construct the solid rectangular bar.

Extrusion length of the rectangular bar along the Y-axis.

3D origin point of the rectangular bar in space.

Rectangle Bar Factory

Final solid geometry of the rectangular bar.

Width of the material removed by the cutting tool during processing (e.g., laser, saw).

Generates a solid cylindrical bar (round bar) from the specified material, with configurable diameter, length, and origin point

Length of the round bar. Must be a positive number.

3D origin point where the round bar will be generated.

Round Bar Factory

Solid cylindrical geometry representing the generated round bar.

Breaks down a linear flat material (e.g., tape, strip) into its fundamental attributes for detailed access and usage.

Deconstruct Linear Flat

The width of the linear flat material, typically in millimeters or inches.

The overall mass of the linear flat material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the linear flat material, given in the relevant currency.

Breaks down a count-based material into its fundamental attributes, including unit size, count, total weight, and price.

Deconstruct Count

height

Breaks down an area material into its fundamental attributes for detailed access and usage.

Deconstruct Area

coverage

The Deconstruct C-Beam node extracts the structural and material properties of a C-beam profile, allowing for precise analysis and manipulation.

Deconstruct C-Beam

The full length of the C-beam, typically in millimeters or inches.

The total height of the C-beam cross-section.

The width of the flange portion of the C-beam profile.

The thickness of the vertical web between the flanges.

The mass of the C-beam, typically in kilograms or pounds.

The monetary cost associated with the C-beam material, given in the relevant currency.

The Deconstruct Hex Bar node extracts key attributes from a hexagonal bar profile, enabling precise analysis and downstream use in design or manufacturing.

Deconstruct Hex Bar

The full length of the hexagonal bar, usually in millimeters or inches.

The distance measured across the flat sides of the hexagonal bar profile.

acrossFlats

The overall mass of the hexagonal bar material, typically expressed in kilograms or pounds, indicating how heavy it is.

The monetary cost associated with the hexagonal bar material, given in the relevant currency.

Represents a T-beam profile with configurable material, dimensions, texture, price, and weight.

T-Beam

Generates a flat solid sheet from material and size parameters.

Material defining the thickness and other sheet parameters.

Width of the sheet along the X-axis, in millimeters.

Length of the sheet along the Y-axis, in millimeters.

Sheet Factory

Generated 3D solid of the sheet geometry.

sheet

Width of material removed by tool. Used for process registration and downstream manufacturing steps.

Applies a volumetric material to an input solid and registers processing options (volume, kerf).

Volumetric material (materialClass: "volumetric").

Base 3D solid to which the volumetric material will be applied.

solid

Volumetric Factory

Resulting 3D solid with the volumetric material applied.

volumetric

Creates a hollow rectangular tube (square in cross-section) by extruding a profile from the given origin point

The material to assign to the resulting tube

Length of the tube extrusion. Must be a positive number and within material limits.

The 3D starting point for the extrusion. If a plane is attached to this point, the extrusion aligns with that orientation.

Square Tube Factory

The final solid geometry of the square tube after extrusion and material application

Generates a 3D C-beam (channel beam) using material dimensions and extrudes it along the Y-axis.

Material with class "c-beam" that defines the geometry parameters of the profile.

Extrusion length of the C-beam along the Y-axis.

Starting 3D point from which the beam is generated.

C-Beam Factory

Resulting 3D solid geometry of the C-beam.

Generates an L-profile (equal-leg angle) solid from material parameters.

Material must include the "l-beam-equal" class with leg length and thickness properties.

Starting 3D point for the L-beam geometry.

L-Beam Equal Factory

Resulting 3D solid geometry of the equal-leg L-beam.

Generates an L-beam solid with unequal legs based on the selected material.