Tool
Sweep a closed profile along a path to create a solid body
Docs for v4.0.1, the latest version.
2
What the node takes in, from wires or typed values.
Profile
Closed profile curve to sweep
Path
Path curve that the profile follows
1
What the node gives out, to wire into other nodes.
Solid
Swept solid body
4
Settings on the node itself, changed in its panel.
Twist Angle
Default 0
Total rotation in degrees applied along the path
Orientation
Default follow-path
Profile orientation mode: "follow-path", "keep-fixed", or "parallel-transport"
Start Scale
Default 1
Profile scale factor at the beginning of the path
End Scale
Default 1
Profile scale factor at the end of the path
Sweep Solid or its keywords.
| Port | Type | Description | | --------------- | ----- | ------------------------------------ | | Profile | Curve | Closed profile curve to sweep. | | Path | Curve | Path curve that the profile follows. | | Solid (out) | Solid | Resulting solid body. |
| Config | Type | Description |
| --------------- | ------ | ---------------------------------------------------- |
| Twist Angle | Number | Total rotation in degrees applied along the path. |
| Orientation | String | follow-path, keep-fixed or parallel-transport. |
| Start Scale | Number | Profile scale at the start of the path. |
| End Scale | Number | Profile scale at the end of the path. |
Sweep
Sweep2
Pipe Solid
Added in v3.0.0
Nov 3, 2026