Tool
Chamfer the sharp corners of a geometry with equal distance, two-distance, or distance+angle modes
Docs for v4.0.1, the latest version.
Chamfer Geometry
Toolset
6
What the node takes in, from wires or typed values.
Geometry
Geometry to chamfer
Edges
Explicit edge curves to chamfer (overrides edgeIndices when connected)
Distance
Default 2
Primary chamfer distance
Distance 2
Default 2
Secondary chamfer distance (used in two-distances mode)
Angle
Default 0.7853981633974483
Chamfer angle in radians from the reference face (used in distance-angle mode)
Indices
Zero-based indices of edges to chamfer. When empty, all edges are chamfered (same as current behaviour).
1
What the node gives out, to wire into other nodes.
Chamfered
Geometry with chamfered edges
1
Settings on the node itself, changed in its panel.
Mode
Default equal
Chamfer mode: "equal" | "two-distances" | "distance-angle"
This node has no documentation beyond its description and ports yet.