Fold and Unroll
Unfolds a part into a net and folds it back up with the Fold slider: 0 = flat net, 1 = the closed part. Every flat panel turns about the edge it shares with its parent panel in the net - handy for checking a net and for folding animations. Planar faces stay whole. Single-curved faces (cylinders, cones, straight lofts) are cut into flat strips along their straight lines and roll up in one piece. Double-curved faces (spheres, domes, tori) are cut into gores joined along the middle, or with Triangle Strips on into rings joined along one column; every facet keeps its true size, so the folded part is faceted. Facets sets how finely curved faces are cut. With On XY on, the net lies flat on the XY plane at Fold 0 and the part stands on it at Fold 1. Flat pieces that carry fold data (the Pieces output of Unroll Surface or Triangle-Strip Unroll) are folded along their own fold lines instead: Fold 0 = the piece where the unroll node laid it, Fold 1 = back on the form.
Docs for v0.6.6, the latest version.
ID
fold-and-unroll-fold-and-unroll-refold-netGroup
Fold and Unroll
Plugin
Fold and UnrollKeywords
5
What the node takes in, from wires or typed values.
Geometry
A Solid or Surface (a list: its first item), or the Pieces of Unroll Surface / Triangle-Strip Unroll
Fold
Default 0.5
0 = flat net, 1 = folded part
Facets
Default 16
Segments per full turn of a curved face (4 - 64); more facets follow the curve more closely
Triangle Strips
Default false
Double-curved faces: off = gores joined along the middle, on = rings joined along one column
On XY
Default true
Lay the net flat on the XY plane at Fold 0 and stand the part on it at Fold 1 (off: the biggest panel stays where it is in 3D)
2
What the node gives out, to wire into other nodes.
Faces
The flat panels at the current fold
Edges
Panel outlines at the current fold
This node has no documentation beyond its description and ports yet.
First documented in v0.6.5
Nov 20, 2026
Versions before it were published before changes were recorded.